Micro SD Storage Expansion Board Micro SD TF Card Memory Shield Module SPI For Arduino

The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and the SPI interface driver, SCM system to complete the file read and write MicroSD card. Arduino users can directly use the Arduino IDE comes with an SD card library card to complete the initialization and read

Module features are as follows:

1. Support Micro SD Card, Micro SDHC card (high-speed card)

2. Onboard level conversion circuit, ie the interface level can be 5V or 3.3V

3. The power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit-board

The communication interface is a standard SPI interface

5.4 * M2 screw positioning holes for easy installation

Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC for the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;

3.3V voltage regulator circuit: LDO regulator for 3.3V output level converter chip, Micro SD card supply;

Level conversion circuit: Micro SD card to signal direction to convert 3.3V, MicroSD card interface to control the direction of the MISO signals are converted to 3.3V, general AVR microcontroller systems can read the signal;

Micro SD card connector: a self-bomb deck, easy card insertion.

Positioning holes: 4 M2 screw positioning holes with a diameter of 2.2mm, so that the positioning module is easy to install, to achieve inter-module combination;