Ayzeze: Please make sure that your device supports wireless charging.
-----
Brand: QGeeM
Name: Car Wireless Charger
Model: JLM-M5
Input: 5.0V/2A 9V/1.67A 12V/1.67A
Output: 5W 7.5W 10W 15W
Charging distance: ≤8MM
Conversion frequency: ≥72%
Charging frequency: 110-205KHZ
Executive standard: QI wireless charging standard
Compatibility: Compatible with all QI standard receivers
Charging method: one to one
Product color: black
Product size: (unstretched width 7.2 height 11.2) CM
(After stretching: width 9.9 height 12.2) CM
(Inner width 9.3CM)"
Product packaging size: 8.5*7*13.9 (CM)
Features:
1. Built-in energy storage capacitor. After the car is turned off, the wireless car charger can continue to be turned on or off. (This function adopts low-power consumption technology, and it can be turned on 10-15 times after the car is powered off.) In most cases, consumers have to get out of the car before picking up their mobile phones. If the car is turned off, they can only restart the engine or take by force. Not good for mobile phones and car chargers.
2. Energy storage capacitors are suitable for high-temperature environments in cars, but only capacitors are safe. There are batteries that store electricity on the market, which are very cheap, but also very dangerous. Because under normal circumstances, the temperature inside the car is very high, the battery is easy to bulge, and even explodes and spontaneously ignites in severe cases.
3. Smart touch buttons on both sides. It can be turned on or off by touching with hands, and the built-in button can also be turned on or off by pressing. For example: if you wear gloves, you can open it with a button.
4. 15W smart induction car charger. The product adopts the most advanced coil induction principle. After the mobile phone is placed on it, it is charged to generate an induced current. The left and right arms pass the motor to automatically clamp the mobile phone. When the mobile phone is completely clamped, the motor will automatically stop. Take off the phone and touch the left and right buttons.
5. The bottom bracket can be adjusted. The bottom bracket and the left and right clamping arms have non-slip silicone pads. The silicone texture design is also very good, no matter the size of the mobile phone, it can be stuck very tightly.
6. Product design, front and rear cooling holes, ventilation and convection heat dissipation, low temperature charging, and fast charging throughout the process. If there are only cooling holes on the back, then the air-conditioning steam may form water droplets and enter the wireless charging, but cannot be released, which will have a certain impact on the product life. If there is no heat dissipation hole, the heat dissipation effect is relatively poor.
7. The inner width is opened to 9.3CM, and the bottom bracket can be adjusted, which is very good for large mobile phones.
Type: Car Wireless Charger
No-delivery refund
