Repti-Zoo Digital Thermostat Heat/Cool Day/Night - Termostat Dzień I Noc

REPTI-ZOO DIGITAL THERMOSTAT HEAT/COOL DAY/NIGHT - DAY AND NIGHT THERMOSTAT

Electronic thermostat designed for the terrarium or aquarium. It has the possibility of separate programming for day and night. In addition, it has two inputs (sockets) for the heating and cooling device respectively.

✅ day / night✅ heating and cooling✅ microprocessor-based (accurate)✅ waterproof temperature probe✅ easy programming✅ programmable temperature with accuracy of 0.1st.C

Thermoregulation:The thermostat is an essential part of any terrarium or sometimes aquarium. Once programmed it constantly watches over the minimum and maximum temperature in your tank. Accuracy to 0.1st.C, separate inputs for heating and cooling, separate settings for day and night to the addition of a programmable hysteresis and an alarm, all this means that you will no longer have to worry about the temperature in your terrarium or aquarium.Easy programming:Takes place via three touch-sensitive buttons. Flip between functions and use the arrows to set the temperature, time of day start of night, etc. Total programming will take you around 2 minutes.Waterproof probe:You can even place it in water. In addition, there is a connection with thread and gasket on the cable to make it even easier for you to install the thermostat for the first time.

What can I connect?Any heating device such as:✅ heating cable✅ heating mat✅ heating bulb, heat emitter✅ aquarium heater✅ and othersAny cooling device✅ refrigerators✅ fans

Technical data:⭐ cable length with probe: 200cm⭐ length of power cable: 150cm (EU plug with earthing)⭐ length of cable to sockets: 200cm (grounded EU plug without pin)⭐ Accuracy of temperature reading and programming: 0.1stC⭐ accuracy (maximum error in thermostat operation) of operation: 1st.C⭐ Operation range: -30st.C to 90st.C⭐ temperature measurement frequency: 5sec.⭐ maximum load 1200W (2x600W)⭐ dimensions of the part with display: 107x88x38mm⭐ dimensions of the part with sockets: 110x63x44mm⭐ dimensions of probe: 8x8x40mm