Specification Thin Pedal Riser 100mm STANDARD AL Thin and Compact Pedal Riser Effector Velcro Raise Bottom Raise Fixing [Aluminum 59g]

Ships from Japan The Thin Pedal Riser 100mm STD AL retains the functionality of the regular Thin Pedal Riser 100mm STD, but is made of aluminum to reduce weight. It weighs about 59 grams, which is about half the weight of the regular version while maintaining the same strength. The paint is highly durable sandblasted. Conventional pedal risers are too large and tend to get in the way inside the board, and the amount of lift is also a little too large. The Thin Pedal Riser 100mm STD AL is a compact pedal riser of MXR size, and the amount of lift is modest at 14mm including Velcro, but it has many conveniences unique to this size. This compact Thin Pedal Riser 100mm STD AL is compatible with a wide range of effect pedals, from mini size to MXR size, and even larger sizes such as Boss and TS. What's more, it doesn't take up any unnecessary space. The 14mm raise was decided upon as the perfect height after careful consideration. With effect boards with frames such as the ARMOR and Kyoritz KC series, the frame of the effect board and the jack can sometimes interfere with each other, but the 14mm raise can solve this problem with many effects. Even when placing a high-rise effector such as a BOSS, the lid can be closed on a board with a low lid clearance such as the Kyoritz KC40 (there is a possibility of contact with the sponge on the top lid). With the KC-50, the lid can be closed smoothly without contacting the sponge. When fixing rubber-footed effects such as wahs and multi-effects to the board, the 14mm height is definitely higher than the rubber feet, but it is not excessively high and does not cause discomfort when playing. By using multiple Thin Pedal Riser 100mm STD AL, it is also possible to mount large multi-effects firmly. The Thin Pedal Riser 100mm STD AL allows for a natural setting without being too high like conventional pedal risers, allowing you to adjust the height when equipping it with taller effects such as BOSS, or when placing effects front to back. The main body is made of durable 2.3mm thick aluminum, which can firmly support even heavy effects. In addition, the strong Velcro tape with a slightly long pile securely fixes the effects to the board. There is no need to worry about it slipping during transportation or performance. In addition, the four corners of the effector's contact surface are angled to allow for the clearance of protruding objects such as rubber feet and screws, allowing the effector to be positioned stably. The Thin Pedal Riser 100mm STD AL is a very useful product for users who want to compactly organize their effects board while improving usability and playability, or for users who want to mount a wah or multi-effects unit to their effects board. The Thin Pedal Riser 100mm STD has the same functionality, but is made of aluminum to reduce weight. This solves the problem that conventional pedal risers are too big, get in the way inside the board, or are a little too high-rise! The Thin Pedal Riser 100's width of 54mm, length of 100mm, and 14mm of rise were decided as the perfect size after careful consideration. If you are looking for a truly easy-to-use pedal riser, please give it a try.