Bicycle Chain Installation and Cutting Suitable for Bicycle Repair Tool Removal, Tool, 1-13 Speed, [product]

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

EASY TO REMOVE CHAIN LINKS: This tool makes it easy to remove and reinstall chain links, which is helpful for chain repair and maintenance. STURDY DESIGN: Made of high quality metal, it is designed to be durable and can withstand long-term use. LONGER TORQUE ARM: The bicycle chain maintenance tool has a 10 CM rubber coated handle, which is easier to use and easier to twist. Even rusty chains can be easily disassembled. UNIVERSAL: The chain remover is suitable for most bicycle chains, such as Shimano, KMC, YBN, SRAM, etc., suitable for 1-13 speed chains. It can be used not only for bicycle chains, but also for other small chains. Ease of Use: Easy to operate even for a new rider. Follow the instructions to position the chainring correctly. Adjust the bolt to hold the link in place, turn the handle and turn it until it pops out. If you do it wrong, it will bend the tool. Replaceable Pin: Comes with a spare pin for long term use of the chain splitter. About this project Durable and Workmanship: High quality Crv metal head, with plastic grip, comfortable to operate and non-slip. Perfect design with pin: This chain tool is designed with replacement pin. Take off the handle, you will see the replacement pin inside the handle. VERSATILE: Suitable for most 1/3/5/6/7/8/9/10/11/12/13 speed bicycle chains, suitable for most bicycles. Accessories: Chain cutter + hook + replacement pin How to properly use a chain cutting tool: The correct way to hold the chain cutter is to hold it horizontally with one hand (for example, the left hand), pinch the horizontal bar firmly with your fingers, engage the chain between the positioning teeth of the chain cutter, tighten the screw below the chain cutter, align the top lever above with the connecting pin of the chain, and slowly turn the top lever with the other hand. It is up to you to decide what state you want it to be in when you separate it. However, the principle is not to push the pin completely down. On the surface, the pin looks like a cylinder, but it actually has a bit of a hyperbola. That is, the two heads are thick and the middle is thin, so if it is completely pushed through, it can only be put in by violent means. At the same time, it is better for the pin to protrude a little inside the chain, 0.5 mm is enough, which makes it easier to hook the other head when reconnecting, and makes the connection operation easier. What needs to be explained is that the section that has been cut and connected usually becomes a little stiff to rotate, and you need to use your hand to pull it around a few times.