Indoor Clothes Drying Bracket by Kawaki Made with Acrylonitrile Butadiene Styrene New Foldable, Wall-mounted Hardware, (ABS), Type, Single-size.

Only two brackets are sold as a set. Clothes drying poles, hangers, etc. are sold separately. It can be folded with the clothesline attached. *If the gypsum board is 9.5 mm or thicker, the V-shaped nails will not penetrate to the back side, so it can be installed without worrying even if there is a base. The initial positioning is important. If the left and right bases are misaligned or tilted, it will affect the appearance and functionality. It can also be attached to wood. When installing the base plate, there must be a gap of approximately 3 mm on all sides. If there is no gap, the main unit cannot be installed. *If the plasterboard is 9.5mm or thicker, the V-shaped nails will not penetrate through to the back, so installation is now possible even if there is a base (wood)! *When driving the double V-nails, be sure to drive them in at an angle as shown in the diagram! The finished product is neat, convenient, and stylish. Furthermore, installation is so easy that even DIY beginners should be able to do it. *Clothesline pole sold separately.