Features :
● Advantage: Flow Regulation, High Pressure, Spraying Uniformity, Rapid Disassembly, With Pressure Gage
● Well-equipped: Included spray gun, filter, lubricating oil, 10m high-pressure tube, 50cm extension bar, material sucking tube, pressure gauge
● Simple operation, easy to carry, Low noise
● Excellent surface quality: One-time film forming, smooth spraying and uniform coating, no brush marks and particles
● High penetrability, increase the mechanical bite force with wall body, better solve the coating of bubbles, cracks and other issues
● Coating rebound small, greatly improve the working conditions, more conducive to the health of construction personnel
● Widely Used: Steel surface structure, Epoxy flooring, Oil paint construction, Tile industry water, Home decoration construction, Construction business, Paint spraying construction of ship, Spray construction of silicon mud algae, Die oil spray
Specifications :
Plug(Option): 220V EU Plug / 110V US Plug / 220V AU Plug
Color: Blue
Power: 2500W
Maximum Flow: 1.8-3.5 L / Min
Maximum Pressure: 3500PSI
Using Pressure: 2500-3000PSI
The Best Spray Distance: 35-50cm
Product Size(L * W * H): About 39cm * 30cm * 48cm / 15"" * 11.8"" * 18.9""
Package Includes :
1x Airless Sprayer Machine
1x 10 Meters High Pressure Hose
1x Pressure gauge
1x Extension Rod
1x Sprayer Gun
1x Sprayer Nozzle
1x Filter
1x Backflow Pipe
1x Material Inlet Pipe
1x Accessory Kit
Note :
- Please ensure that the plug specifications of the power supply to avoid explosion caused by unsuitable voltage
- Thinner is a combination of various organic compounds, including benzene, toluene, butyl ester, formaldehyde and other substances. It is a kind of liquid that dilutes the paint, this is very volatile, do not use it in a confined space
- Coatings, paints, adhesives, emulsioni paint, rust-proof paint or others without large particles that can be used. And particles can not be used
- If you have any problems or concerns, please contact us, we are always there
- Please allow 2-5cm measuring deviation due to manual measurement.Thanks for your understanding
- Monitors are not calibrated same, product color displayed in photos may be showing slightly different from the real object. Please take the real as standard
Operation Method :
1. Put the feed pipe and the return pipe into the liquid (paint) at the same time
2. Turn on the power switch
3. Turn the pressure adjustment knob to the maximum (the factory setting is the maximum by default, if you can't turn it, you can use a wrench or hexagonal screwdriver to assist in the screwing)
4. Open the return valve (in a vertical state), wait for water to leak out of the return pipe; close the return valve (in a horizontal state)
5. At this time, the machine is under pressure, and the spray gun is in the atomized state by pressing the nozzle tip to the front. The pressure valve can be adjusted according to the spraying condition
6. When spraying is finished, open the return valve, pick up the feed pipe and return pipe, and when there is no liquid flowing out of the return pipe, turn off the power(If the liquid is a viscous liquid, it is recommended to let the machine draw clean water to clean the pipe and then repeat the above steps to turn off the machine to prevent the pipe from being blocked when it is used again)
