Model Number: Tiles Epoxy Grouts
Use for: putty for walls
Features 1: Epoxy putty adhesive
Features 2: Sealant
Features 3: Graffiti Plaster
Features 4: Hole Scratch Shedding
Features 5: crack repair
Features 6: crack repair construction tool
Features 7: Glue Adhesive Sealant Fix
Features 8: Wall Glue
Features 9: Strong Glue Silane Polymer
Features 10: Crystal Adhesive Glue
Size: 5*10.5CM
Net content: 150ml
Material: water, resin, aluminum oxalate
Dry time: 1h
Summary:
With smooth surface, it contain water and resinous composition. It can be used for cleaning the ceramic tiles, preventing the tiles from blackening and getting mildew.
Instructions:
1. Clean the dirt in the gap of the tile first. The depth of the gap is more suitable for 2-3 mm. It is recommended that the gap be too large and then use tile reform.
2. Tile the tile reform upside down and shake for about 20 seconds, tear off the sealed aluminum foil, unscrew the cap, point the nozzle vertically at the tile gap, and evenly squeeze the paste along the gap. Then squeeze out the paste and tear it off after scraping the paste).
3. Use a small scraper (or quilting ball) to scrape lightly back and forth a few times to make the tile reform evenly enter the gap. It is recommended to apply more times to make the gap fill up and fill as much as possible.
4. After scraping, remove excess paste and allow it to dry naturally. It is recommended to dry for 2-3 days. It should not be touched during the period.
5, for large or deep gaps can be applied several times every other day.
Precautions:
1. Please try it in a small area before use, and use it normally after no adverse reactions.
2. Depending on the use environment, it takes about 2-3 hours for the tile reform to solidify.
3. After tile reform is hardened, avoid washing with water, especially hot water.
4. It can still be used many times after opening, but remember to seal it to prevent direct sunlight.
5. It should not be used when frozen, avoiding childrens contact. ,
6. Do not rub your eyes accidentally. Rinse immediately with water and consult a doctor.
7. If it is not used up after opening, the needle-nosed cap needs to be rinsed with water before placing, so as not to block the needle-nosed mouth with the remaining tile reform and affect the next use.
8. The temperature is low in winter, tile reform may become sticky, it is recommended to soak in hot water before use.
9. Suitable for storage and transportation temperature -5 ℃ to 50 ℃, outdoor air temperature below minus 10 ℃ is not recommended to buy and use, the temperature is too low, it will affect the use of tile reform.
Packing List:
1 X Tile Repair Agent Wall Sealant
No-delivery refund
