HW600 Industrial Infrared Thermometer Non-contact Temperature Meter Digital IR Pyrometer Portable Temp Tester -50~600℃

Good luck with your favorite purchasesHW600 Industrial Infrared Thermometer Non-contact Temperature Meter Digital IR Pyrometer Portable Temp Tester -50~600℃ HW600 Infrared Thermometer with Intelligent Sensor is used safely and quickly to measure the non-contact temperature on the surface of an object. The most basic design is an infrared perspective (IR) energy detector, which converts energy into a characteristic. Voltage displayed in units of temperature after the ambient temperature change is offset. Temperature range: -50 ℃ to 600 ℃ (-58-1122℉) Accuracy: -50°C ~ 0°C( ± 3°C), 0°C ~600°C (±2%) Before (+2 °C) or (+2%), any greater than or equal to (+2%) Adjustable 0.10-1.00 Distance point size 12:1 Spectral Response 8-14 Um and 500 UXO The repetition rate was 1%, or 0.1°C. The Celsius/Fahrenheit device switch: is Data retention function: Yes Laser Indicator Hot Spot Location: Yes The color LCD function: is The automatic closing function: is Product Weight/Dimension: 110G/146*80*38mm Power supply: 3V 3AAA*2 alkaline battery(not included) 1. Start button/step: When the LCD screen opens, the temperature is measured by scanning. If there is no keyboard, the read status is displayed using the retained icon. The operation unit will be automatically closed within 20 seconds. 2. EMS Key Ems: Emsive Configuration - Click EMS to EMS Configuration Mode, and click (c/f) Value-added key, press the "laser" key to reduce the value. For launches of 0.1 to 1.0 seconds, please click the "EMS" key again to save the configuration. And then back to normal. 3. Temperature Unit Selection Key (C/F). 4. Start/close the laser. Select the ignition/shutdown function of the laser point, open it and press (Laser icon startup). 5. Color LCD display panel (see Figure 2) 6. Battery door: