• Just rub the wet glass!EXCLEAR series oil film remover for exterior windows that uses abrasive sheets and pads to thoroughly remove oil film [Contains 2 sheets + 1 pad (for 2 windshields)]
• ◆Easy but authentic!Simply rub the wet glass to completely remove the oil film.It's a simple sheet type, but the effect is authentic!Just throw it away when you're done using it.
• ◆Ideal for surface treatment before coating Dirty glass will not be able to demonstrate its original performance.If you use this product as a base treatment before applying the EXCLEAR series glass coating, the coating will be more effective.*Please be sure to check the instruction manual for the coating agent.
• ◆The secret to thoroughly removing oil film The sheet contains an original polishing ingredient containing two particles of different sizes.Thoroughly removes even the smallest dirt.A pad that makes it easy to apply force is also included.
• ・I want to remove dirt from the inner windows in a comfortable position.
Just rub the wet glass!
EXCLEAR series oil film remover for exterior windows that uses abrasive sheets and pads to thoroughly remove oil film [Contains 2 sheets + 1 pad (for 2 windshields)]
◆Recommended at times like these
・When you want to remove a glaring oil film
・Before applying water repellent coating to the windshield
・For surface treatment of hydrophilic coating on mirrors and side glass
・For those looking for an easy-to-use oil film remover
◆Simple but authentic!
Simply rub the wet glass to completely remove the oil film.It's a simple sheet type, but the effect is authentic!Just throw it away when you're done using it.
◆The secret to the oil film falling off completely
The sheet contains an original abrasive ingredient containing two particles of different sizes.Thoroughly removes even the smallest dirt.
A pad that makes it easy to apply force is also included.
◆Ideal for surface treatment before coating
Dirty glass will not allow the coating to perform to its full potential.If you use this product as a base treatment before applying the EXCLEAR series glass coating, the coating will be more effective.
*Please be sure to check the instruction manual for the coating agent.
◆Please check before purchasing.
It cannot be used on the following glasses and mirrors as it may damage the surface.
●Specially processed glass and mirrors (tinted, hydrophilic, water repellent, etc.) (special treatments may come off)
●Glass and mirrors of imported and foreign cars
●Resin glass, mirror
◆Q&A
Q How much should I rub?
A Depending on the degree of adhesion of the oil film, please polish repeatedly until it stops repelling.
Q: Is it okay if the abrasive gets on my hands?
A Normally there is no problem, but if you have sensitive skin, please wear protective gloves when working.Also, wash your hands thoroughly after working.
Q: Do I need to apply anything after removing the oil film?
A: There is no problem with it as is, but coating it can improve visibility on rainy days.We recommend a water-repellent coating for the windshield, which allows water to be blown away by wind pressure.For side windows and mirrors, we recommend a hydrophilic coating that absorbs water.We also recommend a super water-repellent type mirror that won't get water droplets on it.Please choose according to your preference.
◆How to use
1.Thoroughly wash away sand and dirt from the glass surface.
2.Take one sheet and fold it in half to wrap half of the strong pad.
3.While the glass is wet, press the sheet against the glass and polish until the liquid stops repelling.
4.Rinse with water and wipe with a clean, dry towel.
●Be careful not to let the pad hit the polishing surface directly.
●If the glass is prone to drying out, such as on hot days, add water while polishing.
●One sheet is equivalent to about one windshield of a medium-sized car.
●Do not wet the sheet directly as the ingredients may run off.
●If powder remains after drying, wipe it off with a clean wet towel.
◆Precautions for use
●This product is exclusively for automobile glass and mirrors.Do not use for any other purpose.
●If used on water-repellent treated glass, the coating will come off.
●In the event that any component gets onto any surface other than the glass, wipe it off immediately with a towel dampened with sufficient water.
●Do not use in strong winds or in areas with a lot of sand or dust, as this may cause scratches.
●Do not use in the blazing sun or when the glass is hot.Do not leave the polish for a long time without rinsing it off.
●This product contains abrasives, so be careful not to apply too much force or polish for too long as this may scratch the glass surface.
●If you have sensitive skin or will be using the product for a long time, use protective gloves.
●Wash your hands thoroughly after use.
●When polishing the edge of the glass, be careful not to let the polishing agent from the sheet adhere to the rubber molding or painted surface.
◆Product information
Name: Oil film remover for automobile glass and mirrors
Application: Cleaning and removal of oil films and water-repellent films on automobile glass and mirrors.
Ingredients: Abrasive, thickener, cleaning agent
Size: 150mm x 95mm
Quantity: 2 pieces
◆Warning/General Caution
・Do not eat or lick it as it is harmful to the human body.
・People with sensitive skin may get a rash, so use protective gloves.
・Keep out of reach of children.
◆First aid
・If you eat or lick it, do not force it to vomit and seek medical attention.
・If the ingredients accidentally get in your eyes or on your face, immediately wash thoroughly with clean water.
・If you feel unwell while using the product, immediately stop using it and rest in a well-ventilated place.
・If the condition does not improve after taking the first aid measures listed above, consult a doctor.
◆Storage and disposal method
・When storing, do not place it within the reach of children, in direct sunlight, in places where the temperature will exceed 40℃, or in places where it will freeze.(Avoid storing in the car during the summer.)
・When disposing, follow the instructions of each local government.