WS55-180 is a high performance,cost-effective 3 phase BL motor controller.Voltage range is from 20V to 50V
The controller can drive the DL motor with HALL or without HALL.
This controller can be used in small equipment, Electric Power Tools, exhaust Fan, grinding machine, Vibrating motor etc
Features:
WS55-180 is a high performance,cost-effective 3 phase BL motor controller.Voltage range is from 20V to 50V .
The controller can drive the DL motor with HALL or without HALL.
The driver is based on advanced technology and be provided with high speed, high , low noise, low vibration, over current , overload , less phase line. , phase line short , alarm output, speed signal output, negative rotation control etc.
This controller can be used in small equipment, Electric Power Tools, exhaust Fan, grinding machine, Vibrating motor etc.
External potentiometer controlCelsiusexternal voltage control.
With overvoltage , over-current , locked-rotor .
Specifications:
Rated voltage:20 to 50 V
Rated current: 10A
Current limiting:15A
imum speed: 20000RPM( the specific speed depends on the motor itself and load)
Storage temperature: -20 celsius .+65 celsius
Usage environment: Avoid direct contact with dust, fumes and corrosive gases
Temperature: 0-45 celsius
Humidity: < 80%, no frost, frost
Shock: 5.9mCelsiusS2
Storage humidity: 0.95%
Size: 9.5 * 7 * 3.5cm Celsius 3.74 * 2.76 * 1.38inch
Weight: 260g
Detail:
1.Two modes of speed regulation:
External potentiometer: through this potentiometer speed regulation;
External voltage: external 10V voltage speed regulation;
Note: The two speed regulation can not be used simultaneously
2. Speed output PG signal: There is a 5v- pulse output between the port and the ground.
The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*NCelsius60.
3. Alarm output ALM signal:There is an 5V alarm pulse output between the port and the ground.
4. inversion function:
FCelsiusR:Fiddle the toggle on the corresponding side, the motor steering direction can be changed. For the toggle , the white part is up and down, then twang it up and down. For the toggle , the white part is horizontal, and the twang horizontally.
5. Start-stop (two control modes):
1. External EN: Transfer through .
2. Side toggle EN: for the toggle , the white part is up and down, then down for the start; for the toggle , the white part is horizontal, then to start
Note: You can only turn one control at the same time, one of the es is closed, and the other one is valid.
6. Locked-rotor :If the motor stops working, on the power again to start.
7. Power light: Green light: power on and off
8. Status light: Red light: two flashes in standby time, after starting, extinguish.
9. Insulation resistance: >100M at ambient temperature and atmospheric pressure
10. Insulation strength: At normal temperature and pressure, 0.5KV, 1 minutes
Wiring diagram:
Package included:
1 x Motor Driver Controller with cable
Note:
No-delivery refund
