Makita Cordless Hammer Drill 40Vmax and Bits Sold with Case (Battery, Charger, Separately) (HR007GZK, Blue)

D-handle specification, 40Vmax model, drilling speed exceeding that of AC-powered machines. Waterproof protection rating IPX6. *Products with an IP rating are designed to be resistant to the effects of dust and water, but this does not guarantee that they will not malfunction. When a battery is installed, the protection rating of the main unit will apply. The overwhelmingly low-vibration "AVT" anti-vibration side grip and anti-vibration handle reduce vibrations transmitted to the hand. Reduces the load during continuous drilling work. Reduces swinging. The acceleration sensor detects swinging when the bit is locked and "automatically stops the motor". *Please hold the machine securely during operation. This function will not work if the acceleration does not meet the specified level when the machine is swung. Wireless linked dust collection. The dust collector also starts when the rechargeable tool is switched on (dust collector, wireless unit, and dust collection attachment sold separately). Linked dust collection keeps the work environment clean. Three modes for chipping. Switch between "rotation," "rotation + impact," and "impact" with the lever depending on the task. DC 36V (40Vmax), slide-type Li-ion battery. Battery and charger sold separately. Drilling capacity: Concrete 28mm / Steel 13mm / Wood 32mm / Core bit 54mm / Diamond core bit 65mm. Rotation speed: 0-980 [rpm] / Impact rate: 0-5,000 [bpm]. Work volume per charge (approximate): Concrete drilling: 16mm, depth 60mm, approximately 60 holes (concrete compressive strength 40MPa/BL4040 installed). Overall dimensions: 473mm (length) x 101mm (width) x 240mm (height) (without side grip, bit, and stopper pole). Weight: 3.8kg (with BL4040 attached, with air duct cap attached, without side grip and stopper pole).