Wele to YouKnow store!
Discover practical and stylish goods for daily life. Wish you a pleasant shopping experience.Battery Included : Yes
Typical Application Fields : Internet of Things (IoT)
High-concerned chemical : none
Model Number : StickS3
ColorReco
M5Stack StickS3 IoT Programmable Controller Kindly Remind: Compatibility NotesStickS3 is structurally inpatible with the following Hat series products: Hat Mini JoyC (SKU: U156), Hat Mini EncoderC (SKU: U157), and Hat 18650C (SKU: U080)Abnormal Device NoiseEarly batches of StickS3 may produce slight abnormal noise after startup, which does not affect functional use.Speaker Volume NoticeWhen powered by battery (USB not connected), it is remended to keep the speaker volume below 75% to avoid unexpected device reboot caused by excessive power consumption.Precautions for UseDo not disassemble the product enclosure without authorization. Disassembly may damage the antenna PFC circuit and affect normal device operation.Button Operation InstructionsLong press: Enter download modeDouble press: Power offSingle press: Power on Product Features Integrated ESP32-S3-PICO-1-N8R8 main controller
8MB Flash and 8MB PSRAM
ES8311 mono audio codec chip
MEMS microphone + speaker
Integrated IR transmitter + IR receiver
Magnetic back design
Expansion interfaces:
Expandable Hat2 bus (2.54-16P)
HY2.0-4P interface
Development Platform
Arduino
UiFlow2
ESP-IDF
PlatformIO
ApplicationsSmart home control
AI voice assistant
IoT project development
Package Includes
1 x StickS3 Specification
Product details
Product Description StickS3is a pact and high-performance programmable controller designed for remote control and IoT applications. It is powered by the ESP32-S3-PICO-1-N8R8 main control chip, supporting 2.4 GHz Wi-Fi wireless munication, with built-in 8MB Flash and 8MB PSRAM to meet diverse application development needs, delivering excellent performance and scalability.For human–machine interaction, it features a 1.14" LCD display, a 6-axis IMU sensor, and programmable buttons. The audio system adopts the ES8311 mono audio codec, bined with a high-sensitivity MEMS microphone and AW8737 power amplifier, enabling clear audio capture and high-fidelity audio output, empowering voice recognition and interactive experiences. It also integrates IR transmitter and receiver, a 250mAh lithium battery, making it suitable for smart home control, AI voice assistants, and IoT project development scenarios.
Download Mode
Connect the device with a USB cable and press and hold the reset button on the side of the device. When the internal green LED flashes, the device has successfully entered download mode.
Kindly Remind
EXT_5V_EN Input Power Supply Notice
The device 5V power interface can be configured as 5V output / input mode. The interface defaults to input mode. In this state, 5V power can be supplied via the Grove interface, the EXT_5V on the top Hat2-Bus, or the 5VIN interface. When configured to output mode, power input is only allowed via USB or the 5VIN on the top Hat2-Bus. Do not supply power through other output interfaces, otherwise there is a risk of short circuit and device damage.
Infrared Reception Notes
1.The infrared receiving and decoding of StickS3 must use the ESP32 RMT peripheral and does not support receiving and decoding via GPIO method.
2. When using the infrared receiver function, the speaker amplifier must be turned off; otherwise, reception will not work properly. The operation method can be referenced in the tutorial
3. Ensure that the transmitter and receiver are aligned as directly as possible, and keep a distance of no less than 30 cm between them. If the distance is too short, abnormal reception may occur.
IR Reception Notice
When using the IR receiving function, the speaker power amplifier must be turned off, otherwise IR signals cannot be received properly.
M5Burner
FAQ
Q1:Why is my StickS3 black screen/won't boot?
Solutions:M5Burner Burn official Factory Firmware "UIFlow2.0 StickS3"
No-delivery refund
