Effector Patch Direct Crank Gold Plated Copper for Guitar Effects Board Cables, Plug, 2-Pack, Straight, 6.3mm, Core, Connection, Space-Saving.

This is a set of two 6.3mm mono connection plugs that allow you to directly connect effects pedals without cables. The "zero-cable design" eliminates the need for cables, reducing the distance between effects pedals to the width of a single plug. Two types are included: a crank type (L-shaped) and a straight type (linear), allowing you to choose the appropriate type depending on the arrangement of your effects pedals on your board. [Material and Size] Internal core material: Copper / Surface treatment: Gold plating. Straight type: Total length 74mm, width 12mm, plug length 31mm, plug diameter 6.3mm. Crank type: Total length 74mm, width 24mm, plug length 31mm, plug diameter 6.3mm. Can be with effect pedals that support a standard 6.3mm mono plug (TS). A 6.3mm plug diameter is the standard size for guitar and bass effect pedals. [How to Use & Features] Simply plug this product into the OUTPUT and INPUT terminals of your effects pedal to complete the connection. Because there is no cable length, the signal transmission distance is minimized, eliminating unnecessary signal paths compared to regular patch cables. Also, since cables will not be scattered around your feet, the appearance of your effects pedalboard will be neater, and it will be easier to place more effects pedals on the board. The crank type is suitable for connecting effects pedals side by side, while the straight type is suitable for connecting pedals vertically or in the depth direction. [Set Contents] Crank-type connecting plug x 1, straight-type connecting plug x 1, total of 2 plugs. [Before purchasing] This product is for 6.3mm mono (TS) plugs only. It is not compatible with stereo (TRS) terminals. Depending on the effect pedal, the jack position and casing thickness may cause the spacing between adjacent effect pedals to be inconsistent. Please check the jack position and casing size of your effect pedal before purchasing. The color of the product in the photos may differ slightly from the actual product due to the shooting environment. For those who want to make their effects pedalboard more compact and neatly organized. This product is a "direct connection patch plug" that connects guitar and bass effects pedals directly without cables. While typical patch cables have a cable of about 10cm, this product eliminates that cable part, connecting two effects pedals with just the plug itself. [Distinguishing between crank type and straight type] Crank type: Suitable when the OUTPUT and INPUT directions are in a straight line when the effects pedals are placed side by side. Straight type: Suitable when the effects pedals are arranged vertically or in depth, and the plug is inserted straight and connected facing each other. Two types are included, so you can choose the one that suits your board layout on the spot. [About the internal structure] The core material is copper with high electrical conductivity, and the surface is gold plated. Gold plating has the effect of suppressing contact failure due to oxidation, and it is a material that is easy to maintain a stable connection even after long-term use. [Recommended for those who:] ・Want to neaten up the wiring of their effects pedalboard ・Want to add another effects pedal to their board ・Want to use existing patch cables For those who want to switch to a more compact setup or minimize cables to reduce problems during live performances. *This is for effect pedals with a 6.3mm mono (TS) terminal only. It is not compatible with stereo (TRS) terminals.