Dulux Colours of the World - Colours of the World - Latex Emulsion for Walls and Ceilings, Matte
Dulux Colours of the World can be used on plasters [cement and cement-lime], gypsum substrates, plasterboard, paper and fibreglass wallpapers.
- Water resistance
-- Mechanical resistance
-- resistant to abrasion with a dry cloth,
-- resistant to gentle washing with water and detergent.
- Heat resistance
-- not suitable for use on heated surfaces, e.g.
- Excellent coverage,
- Good water vapor permeability ensuring the walls can breathe,
- Easy to remove dirt.,
Remove any dirt with a soft sponge and water with the addition of dishwashing liquid for no longer than 15 minutes.
Scrubbing resistance according to PN-C 81914:2002: Type I
Scrubbing resistance according to PN-EN 13300:2002: Class 2
Gloss degree at an angle of 85° according to PN-EN 13300:2002: Matt (light reflectance index <5)
VOC content limit (cat.: A/a): 30g/l (2010): The product contains max. 16g/l VOC
Drying time for a single layer, at a temperature of approx. +20 degrees C and relative humidity of approx. 50%, with good ventilation:
- for surface drying – 1 hour
- for applying the next layer – 2-4 hours
Reducing temperature and/or increasing humidity may extend the drying time
Do not add foreign ingredients. Do not dilute the emulsion.
Wash off any contaminants with water and a cleaning agent. Allow to dry.
Clean fungal surfaces with a putty knife and then apply a suitable fungicide.
Fill any unevenness and damage to the surface with a suitable filler, then level and smooth it.
- Prime highly absorbent, unstable, dusty and porous substrates in the following order:
Stage 2: with Dulux Acryl Matt emulsion diluted with 15-25% clean water (applies to the entire surface).
porous, stable, non-dusty cement-lime plasters, should be primed with Dulux Acryl Matt emulsion diluted with 15-25% clean water.
- relative air humidity should be lower than 80%
- brush: the best effect is achieved by using brushes with synthetic bristles
- roller: the best effect is achieved by using rollers with natural fleece or string rollers with a fleece length of 10-18 mm
- airless spraying - recommended device parameters:
o working pressure 175 [bar]
o nozzle diameter 0.017" / 0.43 mm (nozzle PAA517)
with a spray angle of 50
Spraying parameters performed on GRACO devices, model STmax595.
The selection of parameters for the spraying method depends on individual needs and device characteristics and should be preceded by technical tests.
- spread thoroughly until an even layer is obtained,
Do not use empty containers for storing food.
Packaging: 2.5L
Number of layers: 1-2 layers
Thinner: Not used. The product is ready to use.
Color: nan
Size: L
No-delivery refund
