• Tuningfan Shift Pattern Emblem BLUE Lower Right R 6MT Car
• Base hairline + clear dome processing
• Uses non-yellowing polyurethane resin Adhesive: Strong adhesive
• Size: Height 16mm Width 22mm Thickness approx. 2mm
• Made in Japan
Introducing the much requested blue color shift pattern emblem.
Best match with blue stitch interior
Dome processing using highly transparent polyurethane resin
Achieves both three-dimensional, beautiful luster and high durability due to UV protection.
Upgrade your interior with a luxurious feel that is different from ordinary stickers.
Compatible with all 4-speed manual cars with the same marking pattern.
It can be installed by simply pasting it on the side of the shift boot or on the shift panel.
Size: Height 16mm Width 22mm Thickness approx. 2mm
The size is approximately the same as the genuine shift pattern label of the automobile manufacturer so that it can be applied anywhere.
It is set to a size that is not too large.
A simple and timeless design that eliminates unnecessary logos and decorations.
Tuningfan original product
By adding blue to the metal hairline base,
It expresses a texture similar to anodized aluminum, which changes color depending on the viewing angle.
Blue stitching on shift boots, seats, etc.
A heat gradation blue color with a burnt finish that is often found on titanium shift knobs, etc.
Anodized blue shift knob,
In consideration of matching with other items, the color is slightly darker blue.
*A shift knob without a shift pattern written on it will not pass vehicle inspection.
When driving on public roads, it is essential to install such a shift pattern plate.
Recommended for those who do not have a pattern plate installed with an aftermarket shift knob.
Compatible car model example
Impreza GDB, GGB, GVB, GRB, VAB WRX STI, Legacy BP5, BL5, Skyline GT-R BNR34, Silvia S15,
S2000 AP1, AP2, Civic FD2, Integra DC5, Supra JZA80, NSX NA1, NA2, CR-Z ZF1,
Fairlady Z Z33, Z34, Swift Sport ZC32S, ZC33S, Accord CL7, Fit GE8, Forester SG9,
Alfa Romeo 147 156 GTA, GTV, GT, Fiat Panda, 500, S660 JW5 Fit RS GK5 CPV35
etc.
The adhesive of this product uses the strongest adhesive material,
If there is dust or oil on the adhesive surface, the adhesive strength will be greatly reduced.
If a polishing agent has been applied,
Please remove carefully with parts cleaner or alcohol tissue before pasting.
After peeling off the separator (mounting paper), paste it while being careful not to touch the adhesive surface.
Apply pressure all over and press it so that it sticks.
It may take up to 24 hours for the initial adhesive strength of the adhesive to stabilize.
Please avoid moving or reapplying.
If the temperature is below 10 degrees, it will be difficult to paste, so please use a hair dryer etc.
Please warm it up a little before pasting it.
Flat/gentle quadratic curved surfaces made of common plastics (PE, PP materials)
This product is intended for attachment to interior panels.
For application to rough surfaces such as grained surfaces, curved surfaces, and soft-touch coatings.
Please use the included double-sided tape (JIS "super strong" manufactured by 3M).
Dome part: Polyurethane resin (non-yellowing)
Pattern notation: Hairline laser printing
Adhesive: Strong adhesive
No-delivery refund
