Yamaha carburetor for TW and 200 trail Generic aftermarket replacement and repair 200, TW200, bikes. parts.

This is an aftermarket genuine Yamaha motorcycle carburetor. ✅ [Applicable models] ・YAMAHA TW200 e TW 200 2001 - 2017 ・200 TRAILWAY Trailway etc. *Please note* The tw200e and tw2002JL use different carburetors, so if you are using it on a 2JL tw, it will be almost a snap to install if you have the air cleaner joint and hose clamp (90450-58090) for the DG series tw (5LB10). ✅Accessories: Fuel hose x 1, drain hose x 1, carburetor body x 1, fuel filter x 1 [Hose length] Approximately 35cm ✅ [Caliber size] Manifold side (outer diameter) approx. 33 mm (inner diameter) approx.: 28 mm Air cleaner side (outer diameter) approx.: 45mm (inner diameter) approx.: 42.2mm [Weight] 1203g Factory jet size: 112mm main jet, 35mm slow jet ■ Rust and corrosion caused by aging are not visible to the naked eye, but they are quite advanced. They may be the cause of reduced torque, unstable idling, and poor fuel economy. Rust and corrosion caused by aging can cause breakdowns. ■ This can be used as a replacement when you experience starting problems or a lack of power. We recommend cleaning the inside of the carburetor before use. ■ We recommend keeping it in stock as a replacement. This is an aftermarket genuine Yamaha motorcycle carburetor. ✅【Applicable vehicle models】 ・For YAMAHA TW200 e TW 200 2001 - 2017 ・200 TRAILWAY Trailway etc. ※Please note※ The TW200E and TW2002JL use different carburetors, When using it with a 2JL twin, if you prepare the air cleaner joint and hose clamp (90450-58090) for the DG series twin (5LB10), installation is almost a snap. ✅Accessories: Fuel hose x 1 Drain hose x1 Carburetor body x 1 Fuel filter x 1 ✅【Caliber size】 Manifold side (outer diameter) approx. 33 mm (inner diameter) approx. 28 mm Air cleaner side (outer diameter) approx.: 45mm (inner diameter) approx.: 42.2mm [Factory jet size] ・Main jet 112# ・Slow jet 35# [Weight] 1203g [Overall size] Height: approx. 13cm Width: approx. 6.5cm [Hose length] Approximately 35cm ■ Rust and corrosion caused by aging are not visible to the naked eye and are quite advanced. This may be the cause of reduced torque, unstable idling, and poor fuel economy. Rust and corrosion over time can cause breakdowns. ■ This can be used as a replacement when you experience poor starting or a lack of power. We recommend cleaning the inside of the carburetor before use. ■ We recommend that you stock/keep it as a replacement. [Product liability insurance covered products] - Our company is covered by product liability insurance (PL insurance), so you can purchase with confidence. ・1-year warranty (conditions apply)! If you receive a defective product (even if it has been opened or used), please contact us directly by email. After confirming the problem, we will provide a refund or exchange. [Notes/Not covered by warranty] *Please check before purchasing. If the part number is not correct or compatible and is not compatible, it will not be covered by the warranty. *Failures caused by improper installation or accidents are not covered by the warranty. *Damage to this product caused by normal wear and tear or aging during use is not covered by the warranty. *Please note that labor and operation costs incurred in replacing defective products are not covered by the warranty. *Please note that specifications and design may vary slightly depending on the arrival time and lot. *Please note that the actual color may differ slightly from the image depending on your monitor settings. *If you are unsure about installation, please ask a specialist shop or contractor. *If you are using this product on another model, please install it at your own risk. Please pay attention to the position of the mounting holes and the routing of the throttle wire.