Mini Electric Water Heater Instantaneous Digital Display 5500W Thermostatic Remote Water Heater for

Feature: 1. 2 Control Methods: The water heater can be controlled by remote control to start, shut down and adjust the temperature, or by the touch screen button of the machine. 2. Fast Heating: The electric water heater can instantly provide continuous hot water at a temperature of 30 celsius degree or higher without waiting for preheating. It is the perfect companion for the sink. 3. Easy to Use: The water heater is equipped with digital display and touch control panel, so the temperature setting is easy. You just need to turn on the tap and let the intelligent machine do the rest. 4. Safe: The water heater adopts multiple protection devices, and each machine has been strictly tested. The internal water and power lines are designed to operate separately to avoid water leakage or scale accumulation. 5. Wide Applicability: The water heater is small in size and easy to install, which is suitable for installation in kitchens, toilets, showers, public toilets, etc, and is suitable for ordinary washing, washing dishes, dishes, faces and baths in the temperature range of 30 to 55 celsius degree. Specification: Item Type: Mini electric water heater Material: ABS, copper, aluminum, tempered glass Weight: Approx. 1913g/67.5oz Heating Body: Aluminum die casting Voltage: 220V Power: 5500w Frequency: 50-60HZ Wire: 2.5square meters Waterproof Grade: IPX4 Size: 21x15x5.5cm/8.3x5.9x2.2in Remote Control Power Supply: 2 AAA batteries(Excluded) Temperature Range: 30-55 degrees C Common Faults and Handling Methods: 1. Check whether the power supply is normally powered on. The indicator light on the powered on display will show the temperature, but it will not light up if it is not powered on. 2. Under normal power on, the water flow is turned on, press the middle switch key, the machine starts heating, and the water heater displays: set temperature, water flow, outlet water temperature. 3. If the temperature does not rise, there are two possibilities: one is that the temperature control switch (overheat protection switch) inside the water heater trips. Press the temperature control switch once to restore. The other is the failure of the heating pipe. You need to replace the heating pipe. 4. If the display shows no heating, the display shows the temperature, and does not show the water flow and set temperature, it indicates that the water flow has not passed through the water heater, or the water pressure is too low, or the installation direction is wrong. Pay attention to the correct installation of the inlet and outlet water. However, if the water pressure is enough and the water flow is not heated, then check the turbine at the water inlet of the water heater. It is possible that there is dirt blocking the turbine, resulting in the failure to start the water heater. 5. It is recommended that the length of the water outlet pipe of the water heater should not exceed 3meter. If it exceeds 3meter, there may be a water pressure. (If the water tower is used in rural areas, the height of the water tower shall be higher than 10m to make the water pressure reach the starting value). Package List: 1 x Mini Electric Water Heater4 x Screw4 x Expansion Pipe1 x Remote Control1 x Remote Control Bracket1 x Measuring Ruler1 x Instructions Note: 1. The small instantaneous water heater can be powered on after water supply, and the applicable water pressure is 0.04?0 6MPa2. The power switch should be installed below and should not touch the cabinet3. The water heater shall be installed at a place where the indoor ambient temperature is above 0 degrees C, the pipelines shall be arranged in a centralized manner, and the hot water outlet shall not be too far away from the hot water power supply