[Microphone boom arm for more comfortable recording and transmission] The microphone boom arm is an arm that lifts and holds the microphone on the desk. This can prevent noise from being mixed in due to vibrations on the desk. Since the length and angle of the arm can be adjusted, the position of the microphone can be freely determined. It can be folded compactly when not in use, making it convenient for storage.
[Low-profile design, keeps the area around the desk clean] Since the arm is only 15 mm thick, you can put the microphone out from under the monitor, so it doesn't interfere with the front of the monitor. The dead space under the monitor can also be used effectively. If you install the attached pole, you can also install a microphone by hanging it from above.
[Achieve optimal position in the motion area where you can freely adjust] The microphone can be placed at any angle with 3 joints that rotate 360° horizontally. When the arm is extended, the maximum length is about 709 mm, and the height can be adjusted from about 144 to 706 mm.
[Ball Head] The ball head allows you to accurately adjust the position of the microphone.
[Multiple Microphone Support] Supports 3/8 and 5/8 inch microphone mounts and can be used with a variety of microphones. The maximum load capacity is 2 kg.
[Compatible with 2 fixing methods: clamp and grommet] You can select the most suitable fixing method according to the thickness and material of the desk.
[Convenient cable management for cable handling] Cable management makes cable handling easy. By hiding the cable inside the arm, it can be stored neatly.
Be sure to check the detailed product description at the bottom and precautions before purchasing!
To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.
Återbetalning vid utebliven leverans
