Digital Alarm Clock 180° Rotation Time Projection Alarm Clock With Temperature Snooze Table Clock 12/24H USB Projector LED Clock

Label:yes Manufacture Country: China

Is Smart Device : no Form : Single Face Function : PROJECTION Length : 193mm Width : 85mm Shape : SQUARE Diameter : 193mm Weight : 230g Model Number : DCX-673/NNBB-24042 Screen Type : LED Style : Modern Style Motivity Type : Digital Display Type : DIGITAL Feature : Calendars Material : Plastic

Type : Alarm Clocks Origin : Mainland China

Function Introduction: (1) High-definition LED display: time (12/24-hour system conversion), date, temperature. Can project the current time at the same time. (2) Alarm clock & snooze: a set of alarm clock, press SNZ/LIGHT to enter snooze. (3) Temperature measurement range: -10~50℃ or (14-122℉). (4) Brightness Adjustment Function: 3 levels of brightness can be adjusted. (5) Night mode (18:00-6:00), LED light will automatically dim at night. (6) Can be powered by 3 AAA batteries (shipped without batteries) or plugged into USB power supply (DC 5V-1A), the alarm clock turns off the screen after 30 seconds when only using battery power.

Product list: 1*clock, 1* 1.5 meterUSB power cable,1* manual.

Instructions for use and operation

1.Basic operation (1). In any setting state, no key operation within 15 seconds, return to time mode. (2). During setting, the setting item blinks. (3). Short press + or - key, setting item "plus 1" or "minus 1", long press + or a, setting item accelerate increase or decrease. (4). Driven by AAA battery, press any key, the display will light up with 30 seconds delay. (5). In time state, press + key to switch LED brightness (three steps). (6). In any state, press SNZ/LIGHT key, the projection displays the current time (or turn off the projection), press SNZ/LIGHT key when the alarm clock is ringing to enter the snooze state. (7). When the projected time needs to be rotated 180 degrees, press SWAP to rotate or not rotate the projected display. (8). Long press SNZ/LIGHT key in any state to turn off the screen display, then press any key to redisplay the screen. Anti night disturbance sleep.

2.Description (1). The default display is January 1, 2023, and the year range is 2000-2099. (2). When the alarm clock is ringing, the ringing duration of 1 minute is: BIBIBIBI ringing, no key operation within this minute will stop (end) ringing. And press SNZ/LIGHT to pause the alarm, start the snooze function, the AL logo will flash, wait until the set snooze time period will continue to alarm. Continue the above cycle of alarm process. Press other buttons MODE, ALARM, UP and DOWN to stop (end) the alarm. The default snooze time is 5 minutes. Only when the AL symbol is displayed, it means the alarm is on. And when the AL flag is not displayed, the alarm clock function is turned off. (3). The temperature is measured and detected every 10 seconds, when the temperature is lower than -10℃, it shows -10℃, and higher than 50℃, it shows 50℃.

Tips:the alarm clock turns off the screen after 30 seconds when only using battery power.If you want the clock always keep on,you need connet the power supply.And this clock shipping without batteries.