This product is a full-featured, highly practical, cost-effective dual-channel flat-panel oscilloscope launched by FNIRSI for the maintenance and R & D industry.
This oscilloscope has a real-time sampling rate of 1GSa / s and an analog bandwidth of 100 MHz*2. With complete trigger function (single / normal / automatic), it can be used freely for periodic analog signals or non-periodic digital signals; the built-in high-voltage protection module can tolerate a continuous voltage of up to 400V.
Large time base scroll mode can monitor slow level changes; equipped with highly efficient one-key AUTO, which can display the measured waveform without tedious adjustments.
The display is equipped with a 7-inch 800 * 480 resolution high-definition LCD LCD screen, and the operation method is capacitor Screen touch + gesture operation, extremely convenient.
Cursor measurement function, you do not need to read the background scale unit and quantity when manually reading the amplitude and frequency parameters, and you can directly get the peak, peak and frequency without conversion; extremely convenient screenshot And waveform storage function.
Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform anytime, anywhere with a single touch, no cumbersome prompts and choices, keep calm The current data is saved in the place, which is very convenient.
The powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning,deletion and wave form zooming in, zooming out, moving, etc., to facilitate secondary analysis.
The fuselage is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.
Li Shayu's graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals; Analysis of the harmonic components of the signal.
Built-in 6000 mah high-quality lithium battery, which can last for 4 hours on a full charge, and can be used while charging like a notebook.
Product parameters:
Display Type : Digital display
DIY Supplies : ELECTRICAL
Brand Name : BTMETER
Origin : Mainland China
Number of Channel : 2
Bandwidth : 100MHz
Sample Rate : 1GSa / s
Storage Depth : 240Kb
Timebase : 50S / div~10nS / div
Vertical Sensitivity : 50 mV / div~500 V / div
Input Impedance : 1M ohm
Trigger Modes : Auto / Normal / Single
Trigger Types : Rising Edge / Falling edge
Coupling : DC / AC
Highest Test Voltage : 1X : 40V / 10X : 400V
Cursor : Position XY / Trigger Y
Waveform Manager : Support (1000 pic +1000 waveform)
Frequency Precision : ±0.01%
USB Export : Support
Power Supply : 6000 mAh lithium battery
Återbetalning vid utebliven leverans
