Feature:
1. Using 252 high?quality 2835 SMD lamp beads, uniform light emission, low light decay, high brightness, 120 degree light emission, wide illumination range and long service life.
2. AC12V safe working voltage, safe and reliable, avoid the dangerousness of electric shock, rest assured to use (12v transformer is required for installation, not included).
3. Easy to install, equipped with standard pool lamp accessories and instructions, easy to operate and easy to replace. Ultra?high craftsmanship, the inside of the lamp body is filled with fully enclosed resin, which is water?proof.
4. The lamp body is made of high?quality PC+ABS+ resin material, which is not easy to get moisture and corrosion. It is still suitable for beach baths. With the addition of IP68 ultra?high waterproof level and technology, it is not afraid of water leakage, and it is safe to use
5. It is widely used in courtyard swimming pools, swimming pools, underwater lighting decoration, landscape lighting, garden lighting, garden engineering design, public fountain squares, public or private swimming pools and other fields.
Specification:
Item Type: Underwater Light
Shell Material: PC+ABS+Resin
Diameter: Approx. 26.2cm / 10.3in
Height: Approx. 4.3cm / 1.7inLine Length: Approx. 180cm / 70.9inWeight: Approx. 1176g / 41.5oz
Process: The inside of the lamp body is filled with highly difficult and fully enclosed resin, which is water-proof.
Voltage: AC12V
Power: 18W
Light Color: White Light
Color temperature: 6000K
Lamp Beads: 2835 SMD Lamp Beads
Number of Lamp Beads: 252led
Luminous Flux: 2500LM
Beam Angle: 120 degrees of astigmatism
LED Life: 50000h
Waterproof Rating: IP68
Installation Notes:
1. Drill 5 holes (four screw holes, one wire hole) on the swimming pool wall, and install the fixing bracket on the swimming pool wall with 4 long screws and 4 expansion screw tubes.2. Pass the 180CM power cord through the wire hole on the wall to facilitate subsequent connection to the power supply.3. Use short screws to fix the lamp on the bracket through the screw holes on the surface
of the product (the area around the fixing bracket must be flat and flush with the appearance of the fixing bracket, which ensures that there is no crack
between the lamp and the wall. 4. Disconnect the total current, make sure the surface
is installed in place, connect the power cord to the AC12V transformer output line, and connect the other end of the transformer to the output power supply5. Turn on the power, turn on the lights, and complete the installation
.
Package List:
1 x Lamp1 x Lamp Bracket4 x Long Screw1 x Short Screw4 x Screw Expansion Tube1 x Manual
Note:
A 12v transformer is required for installation, not included
Återbetalning vid utebliven leverans
