Feature:
1. Automatic shutdown, shutdown current is only about 20nA.
2. Automatically detects NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout.
3. Test NPN and PNP transistor common-emitter current amplification factor, the base-emitter threshold voltage, off the collector - emitter leakage current.
4. Support 2 resistors measurement, show its positive and negative, on-state voltage.
5. Resistance measurement maximum resolution 0.01Ω, can be measured up to 50MΩ.
6. Automatically test the pins of a component and show on the display.
7. Measure FET gate threshold voltage and gate capacitance.
8. For the following 2100Ω resistor while measuring its inductance measuring range from 0.01mH - 20H.
9. Can be used as signal generator and frequency meter: frequency range from 1Hz-2MHz and can generate 1%-99% PWM(pulse width modulation) signals.
Introduction:
Multi-functional transistor tester for automatic detection of NPN and PNP transistors, FET, diodes, dual diode, thyristor, SCR, automatic identification of the transistor pinout. Also can be used as square signal and PWM signal generator.
Description:
Name: Transistor Tester
Type: DIY Kit
Display: 160x128 LCD
Power Supply: 1 x 9V Battery(not included); DC 6.8-12V
Current: Approx. 30mA
Resistance Measurement: Max. 50MΩ
Resistance Resolution: 0.01Ω
Capacity Measurement: 25pF-100mF
Capacity Resolution: 1pF
DC Voltage Measurement: Up to 50V
Screen Size: 3.7 x 3cm / 1.45 x 1.18in
PCB Size: 7.8 x 6.2cm / 3.1 x 2.44in
Product Weight: 66g / 2.3oz
Package Weight: 69-73g / 2.45-2.57oz
Reminder:
Before measuring capacitance, the capacitor must be discharged, otherwise very likely damage the meter.
Packing list:
1 x Transistor Tester
Note:
The color deviation is subject to actual system configuration and 1-3cm slight dimension difference is allowed due to manual measurement.
Återbetalning vid utebliven leverans
