*This is a 895 DC motor and 20A DC motor speed controller with bracket, the mounting bracket is designed to provide additional support to the motor or is used as an alternative installation option.
*The motor adopts ball bearings, has high torque, low noise, built-in cooling fan, durable and long service life. The speed regulator can adjust the motor speed, suitable for various DIY and technology.
*Adjusting the potentiometer knob and changing the controller's output duty cycle will change the motor RPM.
*Package includes 1x DC motor, 1x speed control device, 1x bracket, 1x blade link, 2x hardware tools.
*Note: 1. Do not connect directly to AC power (ex: 110V AC). The input voltage of this controller must be DC 9V-60V or it will burn out. 2. The positive and negative poles of the power supply and motor cannot be reversed.
*[Motor specifications:] Model number: 895 DC motor
Rated voltage: 12 V, idle speed: 6000 RPM
Rated voltage: 24 V, idle speed: 12000 RPM
Torque: ≦7.8 Kgf.cm
Idle current: 0.9 A
Power: 150 W Axis diameter: 5 mm
Shaft length: 16 mm
- Length: 72 mm
- Width: 48 mm
*Speed control device specifications: Input voltage: DC 10 V-DC 60 V (ultra-wide operating voltage)
Output voltage: Linear under load
Control power: 0.01-450 W
Rated current: 10A
Maximum current: 20 A (long-term use 10 A, less than 450 W, note that the holding module has no heat dissipation conditions)
PWM duty ratio: 0% to 100%
PWM frequency: 25KHz
Product size (LxWxH): 77*45*28 mm
*[Stent specifications]: Stent material: steel
Holder thickness: 2.8-3 mm
Length: 50 mm
- Width: 53 mm
- Height: 62 mm
Mounting hole diameter: 5.2mm/4.5mm
*【Note:】
1. Do not connect directly to AC power (e.g. 110 V AC). The input voltage of this controller must be DC 9 V-60 V or it will burn out.
2. This speed regulator is suitable for DC brush motors. It is not applicable to speed regulation of DC brushless motors. Voltage regulators and regulators are not applicable.
3. The positive and negative poles of the power supply and motor cannot be reversed.
