Type 1:
Power: 150W
Input: DC12V
Output: AC 110V-200V-220V (as photo shows). also can 110v-0-110v.
Quiescent Current: 0.05A around
Output waveform: frequency square wave
Output frequency: 20KHz around
Protection: no protection
PCB board using military grade plate, Size 5.8 * 5.8 cm , mainly used for: electronic DIY
before the inverter stage.
Note:
1. The board is a high frequency square wave AC output is generally inductive electrical
tape can not "mortars, fen coil transformer etc. '
2. take a small load (LED lights phone charger DVD set-top box, etc.) connected to the
output voltage of the recommendations, such as a low gear: 172V or 200V
3. Load large work long hours (≥100W) is recommended to increase the heat sink,
4. Power can not be reversed. The other power supply and Power cord should be large enough current
5. Do not overload Do not short circuit output.
6. frequency output load voltage multimeter measurements will show higher (is not correct,not actual voltage)
The default output voltage wiring as follows: 'for reference only
V0--V2=110V V0--V3=175V
V0--V4=200V V0--V5=220V
V5--V4=20V V5--V3=45V
V5--V2=110V V4--V3=28V
V4--V2=90V V3--V2=62V
Type 2:
1.Transform voltage from DC 12V to AC 110V 220V.
2.Output waveform: frequency square wave.
3.Adopt high quality PCB board, durable for use.
4.Mainly used for electronic DIY work before the inverter stage.
5.The quiescent current is 0.05A around.
6.Made of high quality material, it's durable.
Specifications:
Product Name: 150W Inverter Boost Module
Material: Metal
Color: Multicolor
Size: 100x30x20mm/3.94x1.2x0.8in
Power: 150W
Input: DC 12V
Quiescent Current: 0.05A around
Output Waveform: Frequency Square Wave
Output Frequency: 20KHz around
Protection: No Protection
The Default Output Voltage Wiring As Follows(Just for Reference):
V0-V2=110V V0-V3=172V
V0-V4=200V V0-V5=220V
V5-V4=20V V5-V3=45V
V5-V2=110V V4-V3=28V
V4-V2=90V V3-V2=62V
Notes:
1.The board is high frequency square wave AC output so it can not drive general inductive electric appliances, such as electromotor, electric fan, coil transformer, etc.
2.When connected with small load(LED light, phone charger, etc.), please connect to the gear of low output voltage: 172V or 200V.
3.When work for a long time under large load, suggest to strengthen the cooling fin.
4.Don't connect the power reversely, and the power supply and power cable should be with enough large current.
5.Don't overload or short circuit the output.
6.High frequency output low voltage measured by multimeter will display higher(it's not correct, not the actual voltage).
Package Included
1 Pcs Inverter Boost Module
Återbetalning vid utebliven leverans
