Feature:
1. MAIN FUNCTION: When there is an abnormality in the main power supply, the backup power supply will immediately work to ensure the continuity of power supply.
2. TWO OPERATION MODES: Dual power automatic transfer switch can be operated automatically or manually, with millisecond switching speed, very safe and reliable.
3. 35MM RAIL INSTALLATION: This automatic transfer switch, suitable for 50 60Hz AC110V 100A emergency power supply system, is specifically designed for PZ30 distribution box.
4. EXCELLENT MATERIAL: The changeover switch is made of flame retardant PC, with good insulation and high temperature resistance. Silver contact is anti aging, safe and reliable, greatly improving the conductivity.
5. WIDELY USED: The automatic transfer switch is isolated anti interference, self switching and self resetting, can be used in various occasion where continuous power outages are not allowed.
Specification:
Item Type: Dual Power Automatic Transfer Switch
Material: PC, Silver
Model: NLQ3 125 2P
Rated Current le: 100A
Insulation Voltage Ui: AC690V
Rated Voltage Ue: AC110V
Frequency: 50 60Hz
Rated Control Voltage US: 110VAC 85percent Us to 110percent Us
Grade: PC Grade
Specification: 2P
Service Life: Electrical: 2000 Times, Mechanical: 5000 Times
Rated Short Circuit Current: 50kA
Fuse: RT16 00 63A
Rated Impulse Withstand Voltage: 8kV
Auxiliary Circuit: Two Relays, Each With Two Sets Contact Capacity: AC110V 50HZ le=5y
Touch Time: <50ms
Operation Conversion Time: <50ms
Return Time: <50ms
Closing Time: <50ms.
Package List:
1 x Dual Power Automatic Transfer Switch
Note:
1. The maximum ambient temperature shall not exceed 40 celsius , the minimum temperature shall not be less than ‑5 celsius , and the average temperature within 24 hours shall not exceed 35 celsius .2. The altitude of the installation site should not exceed 2000m.3. When the maximum temperature reaches 40 celsius , the relative humidity of the installation site should not exceed 50percent . When the temperature is at the lowest temperature of ‑5 celsius and the relative humidity is high, for example, at a temperature of 25 celsius , the relative humidity is 90percent . Due to temperature changes, special measures should be taken to deal with occasional condensation on the surface of the product.
