Rear brake master cylinder for Honda NSR50, NSR80, NS-1, CRM50, CRM80. Includes separate hose and tank. Piston size 1/2. Universal aftermarket part.

Product Description

✅ This aftermarket rear brake master cylinder is recommended for replacing faulty or worn brakes.

✅ The master cylinder is an essential component for operating the brakes and clutch.

✅ [Compatible Vehicles] For Honda NSR50, NSR80, NS-1, CRM50, CRM80, etc.

[Product Information] ✅ [Size] ✅ Piston Size: 1/2 inch ✅ [Mounting Pitch]: Compatible with motorcycles with 40mm-50mm bolts. ✅ Mounting Bolt: 6mm. Compatible with rear brake master cylinders. ✅ Banjo Bolt: 9mm. Total Hose Length: 30cm. ✅ Total Length (approx.): 170mm. ✅ Weight: 263g

✅ Set Contents: 1 Universal Rear Master Cylinder (with Separate Tank)

✅ Are you experiencing a decrease in brake feel or other symptoms due to aging? ✅

1. The brakes feel ineffective.

2. The brake lever doesn't engage all the way.

3. The clutch doesn't respond well.

4. The car stalls when the lever is fully depressed.

5. The rubber inside the reservoir cap has deteriorated.

6. Brake fluid is exposed to the air, which accelerates deterioration.

7. The fluid has darkened.

- In addition, continuing to use the brake fluid without checking its condition increases the risk of a dangerous condition like paper lock.

- Vapor lock is an extremely dangerous condition in which the heat from braking causes the fluid to boil, creating bubbles, resulting in a loss of braking power.

- Fluid leaks may also occur from rusted areas.

- Due to the nature of brake fluid, it has the potential to corrode painted surfaces, not only causing brake failure but also potentially damaging other metal components.

- We recommend periodically checking the reservoir tank to prevent performance degradation due to aging.

If you experience leaks from rusted areas or the brake lever won't return to its original position, replacing the rear master cylinder will improve the situation.

[Caution] This is a generic product, so some modifications may be required for installation and fitting. We recommend checking the dimensions of your bike before purchasing.

Caution (Disclaimer) > Please Read

[Caution] This is a generic product, so some modifications may be required for installation and fitting. We recommend checking the dimensions of your bike before purchasing. We assume no responsibility for damage caused by fire, earthquake, acts by third parties, other accidents, intentional or negligent acts by the customer, misuse, or use under other abnormal conditions. We make no warranties, including implied warranties. We assume no responsibility for damage caused by use other than as described in this instruction manual. We assume no responsibility for damage caused by malfunction due to use with connected devices. This product is not intended for use in facilities or equipment that require high reliability, such as medical equipment, nuclear equipment, aerospace equipment, or transportation equipment, where human life depends on it. We assume no responsibility for any personal injury or fire caused by the product's failure when this product is used in such facilities or equipment control systems. We assume no responsibility for damage caused by fire, earthquake, acts by third parties, other accidents, intentional or negligent acts by the customer, misuse, or use under other abnormal conditions. The warranty stated in the warranty card is the only warranty provided, and we make no other warranties, express or implied, except as otherwise expressly provided. We assume no responsibility for damage caused by use other than as described in this instruction manual. We assume no responsibility for damage caused by malfunctions due to use with connected devices. This product is not intended for use in facilities or equipment that require high reliability, such as medical equipment, nuclear equipment, aerospace equipment, or transportation equipment, where human life depends on it, or where high reliability is required. We assume no responsibility for any personal injury, fire, or other accidents that may occur due to the product's failure when this product is used in these equipment or device control systems. ✅ This is an aftermarket rear brake master cylinder, recommended for replacing faulty or worn-out brakes. ✅ The master cylinder is an essential component for operating the brakes and clutch. ✅ [Compatible Vehicles] Honda NSR50, NSR80, NS-1, CRM50, CRM80, etc. [Product Information] ✅ [Size] ✅ Piston Size: 1/2 inch ✅ [Mounting Pitch]: Compatible with motorcycles with 40mm-50mm pistons. ✅ Mounting Bolt: 6mm. Compatible with rear brake master cylinders. ✅ Banjo Bolt: 9mm　　　Hose Length: 30cm ✅ Total Length (approx.): 170mm ✅ Weight: 263g ✅ Set Contents✅ Universal Rear Master Cylinder (with Separate Tank) 1 piece ✅ Are you experiencing a deterioration in brake feel or other symptoms due to aging? ✅ 1. The brakes feel less effective. 2. The brake lever goes all the way in. 3. The clutch is not sharp. 4. The car stops when the lever is fully squeezed. 5. The rubber material inside the reservoir tank cap has deteriorated. 6. Brake fluid exposure to the outside air accelerates deterioration. 7. The fluid has turned black. ・ In addition, continuing to use your brakes without checking the condition of your brake fluid increases the risk of dangerous conditions such as paper lock. ・ Vapor lock is an extremely dangerous condition in which the heat from braking causes the fluid to boil, creating bubbles, resulting in a loss of braking power. ・ Rust may also cause flute leaks.・ Due to the nature of brake fluid, it has the ability to corrode painted surfaces, causing not only brake failure but also the risk of damaging other metal parts. ・ We recommend periodically checking the reservoir tank to prevent performance degradation due to aging. ・ If there is a leak from a rusted area or the brake lever does not return to its original position, replacing the rear master cylinder will improve the situation. [Note] *As this is a generic product, some modification may be required for installation and fitting. We recommend checking the dimensions of your bike before purchasing.