Tsuchiya YAC Bar Rod Holder Set U-A2 Multi-Grip Front/Rear
Beskrivning
---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer.
【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- Compatible with multi-grip bars: This rod holder can be attached to car interior bars with a diameter of 26 to 35 mm. Clip-type installation: This clip-type installation can be easily done by simply clipping it onto the car interior bar. Stable hold: The tension rubber structure provides a stable hold even on rough terrain. Front/rear set: The rear/front holder pair can accommodate a total weight of up to 1kg, but will reduce rear visibility. Compatible with a wide range of rod diameters: The rear holder is compatible with rod diameters from 20 to 32 mm, and the front holder is compatible with rod diameters up to 15 mm. This rod holder can be attached to car interior bars with a diameter of 26-35mm. It features a clip-on design that easily clips onto the car interior bar. It easily holds the rod. It provides a secure hold on both the tip and grip. It features a tension rubber structure that provides a stable hold even on rough terrain. Please read the following before purchasing: Two car interior bars are required to install this product. This product can be attached to car interior bars with a diameter of 26-35mm. Installing this product will reduce rearward visibility. The total weight of the rear/front holder pair is limited to 1kg. The rear holder can accommodate rods with a diameter of 20-32mm. The front holder can accommodate rods with a diameter of up to 15mm. This product cannot be installed on ceiling-mounted devices such as air purifiers, monitors, or overhead consoles. If you have an air conditioner or room lamp installed on the ceiling, some of their functions may be disabled depending on the installation location.
