Three modes: 1. Sensor mode (lights up when someone enters, turns off 20-25 seconds after leaving); 2. Sensor + Dim mode (lights up when someone enters, dims when someone leaves, dims 10% brightness); 3. Micro-brightness non-sensing mode, slightly brightens by 30%. There is a barrier film between the remote control and the electronics, so you need to peel off the barrier film before using the remote control after receiving the product.
[Motion and Light Sensor & 3 Modes] Simply press the button on the remote control to set three modes. 1. Sensor Mode: The light normally stays off at night or in the dark. When it detects movement from a person, animal, or vehicle, it automatically switches to high brightness and turns off after about 20 seconds if there is no movement. 2. DIM Mode: The light automatically switches to low brightness at night or in the dark. When a person or animal comes within the detection range, it automatically switches to high brightness and turns back to low brightness after about 20 seconds if there is no movement. 3. Constant Mode: The light automatically remains on at medium brightness at night or in the dark.
[333 High-Brightness LEDs, 4-Sided Lighting, 300° Wide-Angle Illumination] The 333 ultra-bright LEDs with a daylight color of 7700k are used. The 4-sided light design allows the lights on the three sides (left, right, and bottom) to rotate 360°, illuminating a wide area with a beam angle of approximately 300°, achieving ultra-diffused brightness. When installed at a height of less than 3m, it can detect up to approximately 7m.
[4-Light Separate Type with 2400mAh Large Capacity] The solar panel is separate from the light body, and the included cable allows you to install the light and panel approximately 5m apart. You can install the light in a shaded location such as under an eave or in a garage, or install the solar panel separately from the light in a sunny location. The built-in 2400mAh large capacity battery ensures long-term use even on rainy days or in winter when sunlight is limited.
[Energy-saving, eco-friendly, zero electricity bill] Simply place the panel in a sunny location, and it will automatically charge during the day and turn on at night. Installing it at your front door not only provides light for your feet and hands in the dark when you come home or when guests arrive, but also enhances security around your home, ensuring peace of mind at night. Sensor lights are highly versatile and can be used for a wide range of purposes, including crime prevention, evacuation, energy conservation, and eco-friendly living.