[32W Circular Fluorescent Lamp] Power Consumption: 14W Voltage: AC100V 32W 50/60Hz Dimensions: φ30*299mm Beam Angle: 170° Base: G10 Color Temperature: 5500K Daylight White Material: Polycarbonate Total Luminous Flux: 1470LM [Lighting Method: Glow Type] Be sure to remove the glow bulb before use. Compatible with glow-type lighting fixtures, no installation required. Be sure to check the lighting method of your lighting fixture before purchasing. If you are unsure, contact the lighting fixture manufacturer. [No Glow Bulb Required!] No glow bulb required, so there is no lighting delay. Easy maintenance and cost savings. If the glow bulb is built-in, connect it directly to a 100V power source. [Note] *1- (Electronic, rapid, solid-state, and inverter lighting fixtures must be directly connected to a 100V AC power source.) Not recommended for enclosed lighting fixtures. *2 - Not suitable for special lighting fixtures. For example, for vanities, study desks, dimming and color adjustment, lighting fixtures designed specifically for fluorescent lights, or lighting fixtures that have been in use for more than 10 years, please be sure to check the lighting fixture's rating plate before purchasing. *3 - Do not use outdoors or in high temperatures or humidity.
[Do not mix] *If your lighting fixture is a two-lamp system, please use both identical bulbs. If your lighting fixture is a two-lamp system, do not mix it with conventional fluorescent lights. If the light does not light, rotate the socket 180 degrees and insert it again. If the base is rotatable and difficult to move, this may be due to the screw being too tight. Try slightly loosening the screw in the center of the base.
