Details
Standard Interfaces: The threads are tightly connected to the pipe to enhance the seal and reduce leakage. The rubber seal also improves sealing performance.
Sensitive Handle: The sensitive, smooth on/off handle allows you to gently lift/pull the water and gently twist between hot and cold water, giving you a pleasant feeling of use.
Application
This shower mixing valve can be connected to the overhead shower, bathtub spout, handheld shower, bathroom faucet, hand spray, etc. for the bathroom, kitchen, etc.
Installation
1. Fix the valve body to the wall (screws are not included).
2. Install the panel to the faucet valve.
3. Install the handle.
4. Install the hexagonal screw on the handle.
Specification
Model: XN-2827DH
Material: Brass, Rubber, Ceramic
Installation Method: Embedded
Structure: Duplex Type
Color: Black
Opening Method: Wrench Type
Nominal Pressure: 6MPA
Installation Requirements: Pre-embedded Body Before Tiling
Surface Treatment: Polishing, Electroplating (Chrome Plating)
Using Temperature: ≤80℃/176℉
Inlet and Outlet Diameter: 1.27cm/G1/2''
Gross Weight: 0.86kg/1.89lbs
Net Weight: 0.73kg/1.6lbs
Package Size: 22*14*10cm/8.66*5.51*3.93in
Cover Size: 12*12cm/4.72*4.72in
Package Included
1*Shower Mixing Valve
1*Handle
1*Panel
All Accessories Needed for Installation
Notes
1. It can only connect one product alone at a time.
2. Please refer to the size of this single-function shower mixer valve before you purchase and install it.
3. Our shower mixing valve kit (handle, panel, and valve body) is used in a matching set.
4. Before installing this shower valve, please remove the original valve body before upgrading your bathroom.
5. The digging depth should be greater than 35mm/1.37in and less than 40mm/1.57in.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
Återbetalning vid utebliven leverans
