Replacement Probe with BNC Interface 3m Cable 0-14PH Q9 Probe Controller Oxidation-Reduction Potential Sensor Hydroponic Laboratory Testing Instrument

Replacement Probe With BNC Interface 3m Cable 0-14PH Q9 Probe Controller Oxidation-Reduction Potential Sensor Hydroponic Laboratory Testing Instrument

PH Replacement Probe With BNC Interface 300cm Cable ： Our pH electrodes are designed for pH measurements in general water such as drinking water, aquariums, fish tanks, swimming pools, hydroponics, irrigation water, scientific research, environmental monitoring, laboratories, spas, other wastewater applications for water testing and industrial water. The standard BNC connector is compatible with any pH meter that uses a BNC connector. Measuring range: 0-14pH, 300cm cable, also features automatic temperature compensation (0~50°C), which helps you to get fast and stable pH readings, as well as the ability to perform a variety of pH tests.

ORP Replacement Probe With BNC Interface 300cm Cable ： The combined electrode is composed of platinum needle indicating electrode and silver-chlorinated silver reference electrode. It is the measuring element of ORP meter & water quality tester, using to measure the ORP of aqueous solution/water.

Feature :

300cm Cable PH Probe

100% Brand new and high quality

BNC connector, suitable for most pH meter and controller with BNC connector.

Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.

Measurement range : 0.00~14.00 PH

Ph Probe Diameter Size : 12mm

Zero-point : 7 +- 0.5PH

Alkali Error : 0.2PH

Theoretical Percentage Slope : ≥98.5%

Internal Resistance : ≤250MΩ

Response Time : ≤1min

Operating Temperature : 0-60ºC

Terminal Blocks : BNC plug

Cable length : Approx. 70cm

Package List：

1 * ph-201 Electrode

1 * ph power buffer 4.01

1 * ph power buffer 6.86

1 * ph power buffer 7.00

1 * ph power buffer 9.18

1 * ph power buffer 10.0

Caution : 1. Not suitable for testing in highly corrosive or viscous liquids, or for continuous testing in high temperature solutions.

2. Not suitable for testing low ionic concentration solutions (such as deionised or distilled water), strong alkaline solutions (pH>12) highly corrosive liquids.

3. Please allow 1-2 cm error due to manual measurement, please make sure you don't mind before ordering.

4. Due to the difference of different monitors, the picture may not reflect the actual colour of the item.

Feature : 300cm Cable ORP probe

Widely used to test the the ORP of aqueous solution/water.

Great laboratory ORP electrode probe.

Ph Probe Diameter Size : 12mm

Suitable for most ORP meter and controller with BNC Q9 connector.

Filled with saturated kcl colloidal solution, used for printing circuit board, ORP on line measurement of containing chromium wastewater treatment.

Material is environmental friendly with no harm to human body and great conductivity.

Mainly used to measure water quality, suitable for swimming pools and spas, koi fish ponds, but also for water sources, aquariums, hydroponics, laboratories, seawater, marine/saltwater fish tanks and other water systems.

Specifications : 1. Type: 300cm Cable ORP probe.

2. Material : PC

3. Type: Laboratory Electrode

4. Probe Type: Sensitive Crystal Ball Bubble

5. Range: 0 ~ ±1999mV

7. Accuracy: ±5mV

8. Applicable Temperature Range: 5 ~ 70℃

9. Electrode Potential: 245-270mv (15~30℃)

10. Internal Resistance of the Reference Electrode: ≤10kΩ

11. Electrode Stability: ±8mv/24

12. Indicator Electrode of Electrode: Good Conduction

13. Type of Electrode Plug: Q9

14. BNC: Upright

15. Length of pH Electrode Line: Approx. 70cm / 27.5in

16. Item Siz e: Approx. 155 * 20 * 20mm / 6.1 * 0.8 * 0.8in (ORP Electrode)

17. Item Weight : Approx. 49.6g / 1.8oz

18. Package Size : Approx. 18 * 4.5 * 2.3cm / 7.1 * 1.8 * 0.9in

19. Package Weight: Approx. 75g / 2.6oz

Package List： 1 * 300cm Cable ORP Electrode

2 * 256MV Power Buffer

Caution :

1. Not suitable for testing in highly corrosive or viscous liquids, or for continuous testing in high temperature solutions.

2. Not suitable for testing low ionic concentration solutions (such as deionised or distilled water), strong alkaline solutions (pH>12) highly corrosive liquids.

3. Please allow 1-2 cm error due to manual measurement, please make sure you don't mind before ordering.

4. Due to the difference of different monitors, the picture may not reflect the actual colour of the item.

Battery Included: No High-concerned chemical: None Origin: Mainland China