10.8V-21V Metal RS550 DC Motor 14 Teeth Gear Micro Motor 25000RPM for Electric Saw Mini Reciprocating Saw Drill Screwdriver

OK

OK

The housing is dented in two places, which caused the end plate to pop out, and the most important thing is the damaged gear (chipping).

product arrived without protection, only a bubble bag, damaged, the engine does not turn, immediate refund

The motor arrived on time but the gear does not match, it was supposed to be 9.5mm but it came 8.2mm and unfortunately it does not fit

The product did not have the appropriate pinion, the diameter is one millimeter larger and it cannot be used.

Thank you, everything as ordered. I recommend it

Already applied and working perfectly.

It is defective

recommend

It is a pity that I did not have time to install this engine. Earlier, I bought the same engine, but due to my carelessness, I did not measure the diameter of the gear and bought it with a diameter of 10 mm. I ordered another one - with a diameter of 8.2 mm, and they also sent one with a diameter of 10 mm...now I have two unnecessary engines..."thank you" - to the assembler!

You sent me the wrong 25v motor with a gear diameter of 9.4. I had requested 21v with a diameter of 8.2 and 14 teeth as the order says. It is useless to me. 6945545202 Antonis Vlastos

I received the parcel, thanks to Jum, but the gear in the motor turned out to be a little larger in diameter, and the razor has a weak motor, you start shaving and the bristles stop it

Fast delivery. I will install, check - I will add. thank you! I was careless... the diameter of the gear is 10 mm, but 8 mm is required. The engine is working.

I received the parcel. It was well packed. I installed the motor on the electric saw. It works like new. I am happy with the product.

One motor is defective! I sent you photos of both bikes, but you didn't reply to my complaint!

The brushes fell off right away. Very not durable. Need to make spare brushes

Perfect. I got what I ordered. Everything is OK. I received it on time.

The motors have not been tested yet, hopefully they will work without problems

The diameter of the six does not match. The original one is smaller (on the right)

I will check and add. Put everything works. How long time will tell.

very bad don't buy it has no zoom and no quality

Installed in a small CHAIN ​​SAW! It works so far

8.2 mm what is it see photo from your page

Your engine burned out after running for less than 30 minutes

I received the order according to the description. Thank you.

Motor for mini saw. Fits perfectly.

Everything is fine, it's already the third order👍

It fits perfectly, the saw works, thank you

I don't know yet if it will work or not. Thank you.

Works, bought in stock for mini saw

One engine doesn't turn, it will seize

Received, fits, works.

The gear is the wrong size

The engine is working. Thank you.

Thanks, everything is fine.

It works! Thank you.

Works great

Everything is fine 👍👍👍

Order 2 times

What you need

Fine...

Thank you